Serving the Odessa area  ·  (432) 248-0371  ·  Open Mon-Sun 7am-7pm
📞 (432) 248-0371 Free Quote

Metal Roofing in Andrews, TX (79714) · Local Professionals

Odessa Metal Roofing · Fast response in Andrews and the Odessa area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+243Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Andrews is a flat, sun-baked oilfield town where the wind never stops and the hail comes down like gravel. Most homes here are brick or stucco ranches and older frame cottages with low-pitch shingle roofs that have taken decades of UV, dust, and storm abuse. If you live near the Andrews County Courthouse or out toward the high school, you know the sound of a shingle roof giving up after a big blow.

That is why homeowners in Andrews (79714) call Odessa Metal Roofing. We are based in Odessa, just up the road, and we have replaced and repaired hundreds of roofs across the Permian Basin. We know the local building stock, from the older homes near Mustang Bowl to the newer subdivisions off Highway 176. When your shingles are baked and your energy bills are climbing, a metal roof makes sense here.

Metal Roofing in Andrews (79714)

Andrews sits on the Llano Estacado, flat and exposed, with sandy caliche soil and almost no trees to break the wind. That means two things for roofing: wind uplift is a constant threat, and hail hits hard. Most houses here have low-slope roofs, which can be tricky for shingles but work well with standing seam or corrugated panels. The older homes near the courthouse square often have tight lots and limited access, so we plan staging carefully. Newer homes on the west side and in the oilfield subdivisions have more room but often have complex hips and valleys that need precise flashing. We also see a lot of manufactured homes and shop buildings that need metal roofs that can handle the heat and wind without constant maintenance.

Our team has worked on everything from 1930s bungalows to modern ranch houses in Andrews and across Ector County. We know the local suppliers, the permit office, and the weather patterns that cause the most damage. When we install a metal roof here, we build it for the Permian Basin, not for a catalog.

Our services in Andrews

How a Job Works in Andrews

Step 1: You call us at (432) 248-0371 or request a free estimate online. We schedule a time to come out to your property in Andrews, inspect your current roof, take measurements, and talk through your options. We will check for hail damage, wind lift, and any leaks, and we will give you a written estimate on the spot.

Step 2: Once you approve the estimate, we pull the required permits from the City of Andrews building department and schedule the work. On installation day, our crew arrives early, protects your landscaping and driveway, and gets to work. Most residential roofs take one to three days, depending on size and complexity. We keep a clean site and communicate with you if anything unexpected comes up, like rotted decking or hidden flashing issues.

Step 3: When the job is done, we walk the property with you, clean up every nail and scrap, and make sure you are satisfied. We do not leave until the site is spotless and you know how to care for your new roof.

Metal roofing in Andrews is priced by the square foot, and the final cost depends on the material, roof complexity, and condition of your existing roof. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam around $10, and metal roof replacement around $9. If you are retrofitting over existing shingles, that starts around $7 per square foot, but keep in mind local code limits how many layers you can have. Repairs start at $450 for leaks or flashing, and screw replacement starts at $750. Coating and painting is a budget-friendly option at about $2.50 per square foot, which is popular on older metal roofs that just need a refresh. We always provide a free estimate so you know exactly what you are paying for. Call (432) 248-0371 to get started.

My house near Mustang Bowl has a low-pitch shingle roof that keeps leaking after storms. Can a metal roof fix that?
Yes. Low-slope roofs are common in Andrews, and shingles often fail there because water sits and wind gets under the edges. We install standing seam and corrugated metal panels that are designed for low slopes and handle wind and hail much better. We will inspect your roof and recommend the right panel profile and underlayment for your pitch.
A storm just blew through Andrews and lifted some panels on my barn. How fast can you get out here?
We offer free storm damage inspections and prioritize emergency repairs in Andrews and the surrounding area. Call us at (432) 248-0371 and we will schedule a visit as soon as possible, usually within a day or two. We can tarp or secure the roof temporarily if needed and then give you a repair estimate.
What does a metal roof cost for a typical three-bedroom ranch in Andrews?
For a 1,500 to 2,000 square foot ranch, most metal roof installations run between $12,000 and $20,000 depending on the material and roof complexity. Standing seam is on the higher end, corrugated on the lower. Repairs are much less, starting at $450. We give free estimates so you can get an exact number for your home.
Do I need a permit to replace my roof in Andrews, and how long does it take?
Yes, the City of Andrews requires a permit for roof replacements and some repairs. We handle the permit application and inspection process for you. Timing varies, but we schedule work to avoid delays. We will confirm current requirements with the city before we start.
My neighbor says my new metal roof might cross the property line. How do you handle that?
We always respect property lines and build to code. Before installation, we verify setbacks and talk with you about any HOA rules. If there is a question about the property line, we recommend a survey. We will coordinate with your neighbor and the HOA if needed to keep the project smooth.
Are you fully insured for roofing work in Andrews?
Yes, Odessa Metal Roofing is fully insured with general liability and workers' compensation coverage. We are happy to provide proof of insurance before we start any work on your property.
How often should I have my metal roof inspected in Andrews, and what should I look for?
We recommend an inspection every two to three years, and after any major hail or wind storm. Check for loose screws, dented panels, and signs of leaks around flashing and seams. In Andrews, the sun and dust can degrade sealants over time, so a quick check now can prevent a big repair later. We offer free inspections.
Why choose us?

Trusted professionals in Odessa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Odessa

All your work handled by qualified professionals in Odessa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

243+ Verified Client Reviews in Odessa

⭐⭐⭐⭐⭐ 4.9/5 · 243 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Odessa · Response within 24h · No commitment · ☎ (432) 248-0371

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Odessa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm