Serving the Odessa area  ·  (432) 248-0371  ·  Open Mon-Sun 7am-7pm
📞 (432) 248-0371 Free Quote

Metal Roofing in Lamesa, TX (79331) · Local Professionals

Odessa Metal Roofing · Fast response in Lamesa and the Odessa area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+243Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lamesa is a cotton-country town where the roofs take a beating. The older homes around the downtown square and along North 4th Street still carry their original low-pitched shingle roofs, while the farm shops and cotton gins out on the edges of town are topped with corrugated panels that have seen decades of sun, hail, and West Texas wind. If your roof is showing its age, we can help.

Homeowners and property managers in Lamesa (79331) call Odessa Metal Roofing because we understand the local building stock, from the 1950s ranches near Lamesa High School to the newer metal shops going up along Highway 87. We are based in Odessa and serve Lamesa and the surrounding areas, bringing the same straightforward approach to every job.

Metal Roofing in Lamesa (79331)

Lamesa sits on the flat, sandy caliche ground of the Llano Estacado, where the wind rarely stops and the summer sun bakes shingles until they curl and crack. The housing stock here is a mix of older frame cottages, brick ranches from the 1960s and 70s, and a growing number of metal buildings on the outskirts. Many of the older homes have low-slope roofs that were not designed for modern shingle performance, which is why we often recommend a standing seam or corrugated panel system that sheds water and handles thermal movement. The soil here drains well, but the intense UV and hail mean fasteners and sealants need to be checked regularly. We also work on the agricultural buildings and cotton gin structures that are common in Dawson County, where function matters as much as appearance.

Our team has installed and repaired metal roofs across the Permian Basin, and we know what works in this climate. We use materials and fastening methods that are proven to hold up against West Texas weather, and we take the time to explain your options so you can make an informed decision.

Our services in Lamesa

How a Job Works in Lamesa

Step 1: You call us at (432) 248-0371 or request a free estimate online. We schedule a time to come out to your property in Lamesa, inspect your existing roof, and discuss your goals. We will check for leaks, damaged panels, and any underlying issues, then provide a written estimate with clear pricing.

Step 2: Once you approve the estimate, we pull the necessary permits with the City of Lamesa and schedule the work. On older homes near the downtown square, access can be tight, so we plan for material delivery and staging carefully. We also coordinate with any HOA requirements if applicable. Our crew works efficiently and keeps you informed throughout the project.

Step 3: After the work is complete, we clean up the site thoroughly, haul away old materials, and walk the property with you to make sure you are satisfied. We do not consider a job done until you are happy with the result.

Pricing for metal roofing in Lamesa depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs, including leak fixes, start at $450, and screw replacement or re-fastening starts at $750. For a precise quote, call us at (432) 248-0371 to schedule a free estimate. We will give you a clear, no-pressure price for your specific project.

My house is near the downtown square in Lamesa and has an older low-pitch roof. Can you install metal over it?
Yes, we can often install a metal roof over your existing shingles, provided the structure is sound and local code allows it. We will inspect your roof and let you know if a retrofit is a good option or if a full tear-off is needed. Older homes near the square often have unique framing, so we take extra care to ensure proper ventilation and fastening.
A storm just blew through Lamesa and lifted some panels on my barn. How quickly can you respond?
We offer free inspections for storm and wind damage and can usually schedule an assessment within a day or two. Call us at (432) 248-0371 to report the damage. We will secure the area if needed and provide a repair estimate. For agricultural buildings, we understand that time is critical, so we prioritize emergency repairs.
What is the typical cost to replace a metal roof on a 2,000 square foot home in Lamesa?
For a 2,000 square foot home, a basic corrugated panel roof might start around $11,000, while standing seam could range from $20,000 to $25,000, depending on pitch, access, and trim details. These are ballpark figures. We recommend a free estimate to get an accurate price for your specific home.
Do I need a permit from the City of Lamesa to replace my roof?
Yes, the City of Lamesa typically requires a permit for roof replacements. Requirements can vary, so we always verify with the local building department before starting work. We handle the permit application process for you to ensure compliance.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We can adjust gutter and downspout placement to direct water away from the property line. If you are in an HOA, we will also help you submit the necessary design approval. It is always a good idea to communicate with your neighbor before the project starts.
Are you insured for roofing work at my Lamesa property?
Yes, we are fully insured with general liability and workers' compensation coverage. Your property and our crew are protected.
What maintenance does a metal roof need in Lamesa's dusty, windy climate?
We recommend an annual inspection to check fasteners, seals, and flashing, especially after hail or high winds. Dust and debris can accumulate in valleys and gutters, so cleaning those out helps prevent water backup. We offer maintenance plans and can perform a free inspection to get you started.
Why choose us?

Trusted professionals in Odessa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Odessa

All your work handled by qualified professionals in Odessa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

243+ Verified Client Reviews in Odessa

⭐⭐⭐⭐⭐ 4.9/5 · 243 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Odessa · Response within 24h · No commitment · ☎ (432) 248-0371

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Odessa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm