Serving the Odessa area  ·  (432) 248-0371  ·  Open Mon-Sun 7am-7pm
📞 (432) 248-0371 Free Quote

Metal Roofing in Seminole, TX (79360) · Local Professionals

Odessa Metal Roofing · Fast response in Seminole and the Odessa area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+243Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Seminole sits out on the flat, windy plains of Gaines County, where ranch houses, brick ranches, and manufactured homes take a beating from hail, dust, and spring wind. The lots are wide and open, the skies are huge, and most roofs here are low-pitched shingle or panel that have seen one too many storms.

We are Odessa Metal Roofing, and we serve Seminole (79360) from our base in Odessa. Homeowners around the Gaines County Courthouse square and out toward the Seminole schools call us when their shingles start shedding granules after a hailstorm or when a windstorm peels back panels on a shop or barn. We know the local housing stock, the soil, and the weather patterns that wear roofs down out here.

Metal Roofing in Seminole (79360)

Seminole is farm and ranch country, and the roofing work here reflects that. You have older frame and brick homes near downtown, manufactured homes and oilfield-worker housing on the edges, and a lot of barns, shops, and agricultural buildings that need metal. The ground is sandy caliche, which drains fast but can shift, and the open plains mean wind gets a clean shot at your roof with nothing to break it. Hail is the big one, followed by wind that lifts panels and tears at fasteners. We see a lot of failed fasteners, separated seams, and flashing gaps that turn into active leaks. Ice damming is rare but does happen at the eaves during a cold snap. Because lots are wide, access is usually good, but we still plan for tight spots around older homes and outbuildings. Our team has worked across the Permian Basin, and we bring that experience to every Seminole job, whether it is a full standing seam install on a new ranch house or a metal roof over shingles on an older home near the high school.

Our services in Seminole

How a Job Works in Seminole

Step 1: You call us at (432) 248-0371 or request a free estimate online. We schedule an on-site assessment at your Seminole property, inspect the roof, check the decking and flashing, and talk through your options. We give you a written estimate before any work starts.

Step 2: Once you approve, we pull the required roofing permit with the city or county (rules vary, so we verify with the local building department). We order materials, coordinate delivery, and schedule the crew. For homes in an HOA or near a historic district, we help with color and profile approval. On the job, we protect your landscaping, remove the old roof if needed, and install the new metal system. We keep the site organized and safe.

Step 3: When the work is done, we clean up thoroughly, haul away all debris, and do a final walkthrough with you. We make sure you understand the warranty, the maintenance needs, and how the new roof sheds water. We leave your property clean and ready.

Pricing in Seminole depends on the size and pitch of your roof, the material you choose, access, and the condition of the existing roof. As a ballpark, metal roof installation starts around $8 per square foot, standing seam around $10, metal roof replacement around $9, and a metal roof over shingles (retrofit) around $7. Corrugated and ribbed panel roofing starts around $5.50 per square foot, and metal shingle or stone-coated steel around $9. Repairs like leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or chimney repair around $600. We give free estimates, so call (432) 248-0371 and we will give you a clear, written price for your Seminole property.

My house is near the Gaines County Courthouse and has an older low-pitched shingle roof. Can you install metal over it?
Yes, in many cases. A metal roof over shingles (retrofit) can work if the existing roof has only one layer and the decking is sound. We inspect the structure first. Older homes near downtown often have 1930s to 1950s framing, so we check for any sagging or rot before recommending a retrofit. If the decking is questionable, we may suggest a full tear-off and replacement.
A storm just blew through Seminole and lifted some panels on my barn. How fast can you respond?
We offer free storm and wind damage inspections and prioritize emergency repairs. Call us at (432) 248-0371 and we will schedule a visit as soon as possible. We can tarp or secure the area if needed and give you a repair estimate. We document the damage for insurance claims, but coverage decisions are up to your insurer.
What does a typical metal roof repair cost in Seminole?
Most repairs start around $450 for leak fixes, and screw replacement or re-fastening starts around $750. The final price depends on the size of the repair, the type of metal, and access. We give free estimates, so call (432) 248-0371 and we will give you a written quote for your specific issue.
Do I need a permit to replace my roof in Seminole?
Roofing permits are commonly required for a full replacement or re-roof, but thresholds and fees vary by jurisdiction. We verify the requirements with the City of Seminole or Gaines County building department before starting work. We handle the permit application and inspections so you do not have to worry about it.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues for them. What should I do?
We can adjust gutter placement and downspout locations to direct water away from the property line. If you are in an HOA, we help with design approval. For property line disputes, we recommend talking with your neighbor and checking your plat. We can also suggest a survey if needed. Our goal is to keep your roof working well without causing problems next door.
Are you fully insured for work at my Seminole property?
Yes. We carry general liability insurance and workers' compensation coverage. You can feel confident that our team is covered while working on your property.
What maintenance does a metal roof need in Seminole's climate?
Metal roofs are low maintenance, but in Seminole's dusty, windy environment, we recommend an annual inspection to check fasteners, seams, and flashing. Dust and debris can accumulate in valleys, and wind can loosen screws over time. We offer free inspections and can re-tighten or replace fasteners as needed. Keeping gutters clear and trimming overhanging branches also helps.
Why choose us?

Trusted professionals in Odessa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Odessa

All your work handled by qualified professionals in Odessa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

243+ Verified Client Reviews in Odessa

⭐⭐⭐⭐⭐ 4.9/5 · 243 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Odessa · Response within 24h · No commitment · ☎ (432) 248-0371

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Odessa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm