Serving the Odessa area  ·  (432) 248-0371  ·  Open Mon-Sun 7am-7pm
📞 (432) 248-0371 Free Quote

Metal Roofing in Stanton, TX (79782) · Local Professionals

Odessa Metal Roofing · Fast response in Stanton and the Odessa area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+243Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Stanton is a small West Texas town where the old downtown blocks and the farm and ranch places out on the flats still carry shingle and panel roofs that have taken decades of sun, hail, and wind. If you live here, you know the look: low-pitched roofs on 1950s ranch houses, corrugated metal on barns and shops, and a few newer homes with standing seam or stone-coated steel that went up after the last big hailstorm.

We are Odessa Metal Roofing, and we serve Stanton from just up the road in Odessa. Homeowners around the Martin County Courthouse square and out toward the golf course call us because we know how metal behaves in this climate, and we can usually get a free estimate out to you within a day or two. We are fully insured, and we handle everything from a single leak repair to a full roof replacement.

Metal Roofing in Stanton (79782)

Stanton sits on the same flat, sandy caliche ground as Odessa, and the housing stock tells the story. Around the courthouse square and the older residential blocks, you have 1930s to 1950s frame and brick homes with low-slope shingle roofs that are often on their second or third layer. Out on the edges of town and toward the farms, there are shops, barns, and sheds with corrugated panels that have been re-fastened a time or two. The soil drains fast, but a hard West Texas thunderstorm can still pond water at the eaves if the flashing is not right. We see a lot of wind-lifted panels and failed fasteners after spring gusts, and hail bruising on older shingles that leads people to ask about a metal roof over shingles retrofit. Our team has worked on everything from small carports to large agricultural buildings in Martin County, and we know which panel profiles and fastening patterns hold up to the sun and wind here.

We have been serving Stanton and the surrounding Odessa area for years, and we understand the local building department and what it takes to get a permit pulled and an inspection passed. Whether you are on a tight lot near downtown or out on a ranch road, we can scope the job and give you a straight answer.

Our services in Stanton

How a Job Works in Stanton

Step 1: You call us at (432) 248-0371 or request a free estimate online. We schedule a time to come out to your property in Stanton, look at the roof, check the attic if needed, and talk through what you are seeing. We will give you a written estimate with options, and we will not pressure you into anything.

Step 2: Once you approve the scope, we handle the permit and scheduling. In Stanton, most full replacements need a roofing permit, and we will confirm the current requirements with the city. If you are in an HOA or a historic district, we will help you get the design approval before we order materials. On the day of the job, our crew protects your landscaping and gets to work. For a metal roof over shingles, we inspect the existing deck and make sure the retrofit is code-compliant before we install the new panels.

Step 3: When the work is done, we clean up every nail and scrap, haul away the old materials, and walk the roof with you. We do not leave until you are satisfied and you know how to reach us if anything comes up later.

Pricing in Stanton depends on the size and pitch of your roof, how many layers are already there, and how easy it is to access. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a metal roof over shingles retrofit starts around $7. For smaller jobs, metal roof repair and leak repair start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. We also offer metal roof coating and painting from $2.50 per square foot, and gutters from $9 per linear foot. Every roof is different, so call us at (432) 248-0371 for a free estimate and a firm number.

My house near the Martin County Courthouse square has two layers of old shingles. Can you install a metal roof over them?
In many cases, yes. Building code limits how many layers you can have, so we will check what is there and confirm with the local building department. If the deck is sound and the layers are within the limit, a retrofit can save you the cost of tear-off. We will give you a straight answer after a free inspection.
A spring windstorm peeled back some panels on my barn outside Stanton. How fast can you get out?
We prioritize storm and wind damage calls. Call us at (432) 248-0371, and we will schedule a free inspection as soon as we can, often within a day or two. We can tarp or secure the roof temporarily if needed and then give you a repair estimate.
What does a metal roof cost for a typical 1,500 square foot ranch house in Stanton?
For a house that size, a basic corrugated or ribbed panel roof might start around $5.50 per square foot, while standing seam or stone-coated steel will run more. The exact price depends on pitch, access, and whether we are going over existing shingles or doing a full tear-off. Call (432) 248-0371 for a free estimate.
Do I need a permit to replace my roof in Stanton?
Most full roof replacements and re-roofs require a permit in Stanton. Requirements can change, so we always confirm with the city building department before we start. We can handle the paperwork for you as part of the job.
My neighbor and I disagree about where the property line is. Can you help with that?
We are not surveyors, so we cannot determine property lines. We recommend having a survey done if there is a dispute. If your HOA has design rules about roof color or panel style, we can help you submit the paperwork and make sure the materials meet the guidelines.
Are you insured for work on my property in Stanton?
Yes. We are fully insured, with general liability and workers' compensation coverage.
What should I do to maintain my metal roof in Stanton between storms?
Check for loose fasteners and debris after big wind events, and keep gutters clear. The intense UV and heat here can degrade sealants over time, so a periodic inspection every few years is smart. We offer free roof inspections and can re-fasten or replace screws as needed.
Why choose us?

Trusted professionals in Odessa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Odessa

All your work handled by qualified professionals in Odessa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

243+ Verified Client Reviews in Odessa

⭐⭐⭐⭐⭐ 4.9/5 · 243 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Odessa · Response within 24h · No commitment · ☎ (432) 248-0371

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Odessa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm