Serving the Odessa area  ·  (432) 248-0371  ·  Open Mon-Sun 7am-7pm
📞 (432) 248-0371 Free Quote

Metal Roofing in Kermit, TX (79745) · Local Professionals

Odessa Metal Roofing · Fast response in Kermit and the Odessa area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+243Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Kermit sits right on the edge of the Permian Basin, where the sand dunes push up against the neighborhoods and the wind never seems to stop. Most homes here are modest ranches and manufactured houses on good-sized lots, many built during the oil booms, with a mix of brick, stucco, and siding. The sun is brutal, the hail comes sideways, and the dust gets into everything.

That is why folks in Kermit (79745) call Odessa Metal Roofing. We know how wind-driven sand scours shingles and how a good hailstorm can beat a roof to death. We have worked on homes near Winkler County Park and along Highway 302, and we treat every roof like it is our own.

Metal Roofing in Kermit (79745)

Kermit is flat, sandy, and windy. The soil is caliche and sand, which means proper fastening and flashing details matter more than in other places. The wind carries sand that acts like sandpaper on asphalt shingles, wearing them down years before their time. Hail is the other big issue, and we see a lot of dented and bruised shingles after spring storms. Metal roofing handles both much better. Standing seam and corrugated panels shed hail and resist sand abrasion. For the oilfield buildings and agricultural shops around town, corrugated and ribbed panels are the go-to because they are tough and affordable. We also work on manufactured homes, which need special attention to roof pitch and fastening.

Our team has been serving Kermit and the surrounding Odessa area for years. We understand the local building stock, from the older homes near downtown to the newer subdivisions and the many oilfield-service buildings out on the edges of town.

Our services in Kermit

How a Job Works in Kermit

Step 1: You call us at (432) 248-0371 or fill out our contact form. We schedule a free on-site assessment at your property in Kermit. We look at the roof, the attic if accessible, the flashing, and the gutters. We also check for signs of wind or hail damage. Then we give you a written estimate with options.

Step 2: Once you approve, we pull the necessary permits from the City of Kermit (we handle the paperwork) and schedule the work. For a full replacement, we typically need a day or two depending on the size and complexity. We protect your landscaping and keep the site tidy. If your home is in an HOA, we can coordinate with them on panel profiles and colors.

Step 3: After the work is done, we do a thorough cleanup, including a magnet sweep for nails. We walk the roof with you to show you the completed work and answer any questions. We do not leave until you are satisfied.

Pricing for metal roofing in Kermit depends on the size of your roof, the material, and the condition of the existing roof. Here are some ballpark figures based on our current rates: Metal roof installation starts at $8 per square foot. Standing seam starts at $10 per square foot. Metal roof replacement starts at $9 per square foot. Metal roof over shingles (retrofit) starts at $7 per square foot. Corrugated and ribbed panel roofing starts at $5.50 per square foot. Metal shingle and stone-coated steel start at $9 per square foot. Copper and specialty metal start at $20 per square foot. Metal roof repair starts at $450, and leak repair also starts at $450. Screw replacement and re-fastening starts at $750. Flashing, chimney, and skylight repair starts at $600. Snow guards and ice protection start at $1,200. Gutters for metal roofs start at $9 per linear foot. Commercial and agricultural metal roofing is quoted per project.

Factors that affect cost include roof size, pitch, accessibility, number of penetrations, and whether we need to remove the old roof. For a free estimate, call (432) 248-0371.

My roof is constantly getting sandblasted by the wind. Will a metal roof hold up better than shingles?
Yes. Asphalt shingles wear down quickly when sand is driven across them. Metal roofs, especially standing seam and corrugated panels, resist abrasion and will last much longer in Kermit's windy, sandy conditions. We can show you samples and explain the differences.
A storm just blew through and I have a leak. How fast can you get to my house in Kermit?
We offer emergency repairs and free inspections for storm damage. Call us at (432) 248-0371 and we will schedule a visit as soon as possible, often within 24 to 48 hours depending on demand. We can tarp the roof if needed to prevent further damage.
What is the typical cost to replace a roof on a 1,500 square foot home in Kermit?
For a basic metal roof replacement, you can expect to pay between $9 and $12 per square foot, so around $13,500 to $18,000 for 1,500 square feet. That includes materials and labor. The exact price depends on the material you choose, roof complexity, and whether we remove the old roof. Call us for a free estimate.
Do I need a permit to replace my roof in Kermit?
Yes, the City of Kermit requires a permit for roof replacements. We handle the permit application and inspections for you. Requirements can vary, so we always verify with the local building department before starting work.
My neighbor's tree branches hang over my roof. Can I trim them without permission?
In Texas, you generally have the right to trim branches that overhang your property line, but you should not damage the tree. If the tree is on your neighbor's property and poses a risk, it is best to talk to them first. For HOA properties, check your HOA rules before making changes. We can advise on roof damage from branches and help with repairs.
Are you fully insured for roofing work in Kermit?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property in case of an accident.
What maintenance does a metal roof need in Kermit to handle the heat and dust?
We recommend an annual inspection to check fasteners, seals, and flashing. Dust and sand can accumulate in valleys and gutters, so cleaning them out helps prevent water backup. Also, check for loose screws after high winds. We offer maintenance plans and can perform inspections for a fee.
Why choose us?

Trusted professionals in Odessa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Odessa

All your work handled by qualified professionals in Odessa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

243+ Verified Client Reviews in Odessa

⭐⭐⭐⭐⭐ 4.9/5 · 243 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Odessa · Response within 24h · No commitment · ☎ (432) 248-0371

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Odessa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm