Serving the Odessa area  ·  (432) 248-0371  ·  Open Mon-Sun 7am-7pm
📞 (432) 248-0371 Free Quote

Metal Roofing in Crane, TX · Local Professionals

Odessa Metal Roofing · Fast response in Crane and the Odessa area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+243Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Crane is a small West Texas town where the wind never stops and the sun bakes everything flat. Most homes here are modest ranch-style houses and manufactured homes on good-sized lots, with metal barns and shops out back. The ground is sandy caliche, and the nearest big trees are mesquite and the occasional pecan someone planted years ago.

When Crane roofs fail, it's usually the same story: hail dents, wind lifts a panel, or a fastener backs out and the next rain finds its way in. We're Odessa Metal Roofing, and we've been fixing those problems for homeowners and ranchers around Crane for years. From the older blocks near Crane High School to the newer places out on the highway, we know how the weather here treats a roof.

Metal Roofing in Crane

Crane sits on open ground where hail comes in sideways and spring winds can peel back a poorly fastened panel. The soil is sandy caliche that shifts a little with wet and dry cycles, so we pay close attention to how a roof is anchored. Most properties here are single-story homes with low-slope or hip roofs, plus detached shops, barns, and carports that take the worst of the weather. Corrugated and ribbed panel roofing is common on those outbuildings because it sheds hail and handles the wind, and we install it with the fasteners and spacing that hold up in this county.

Our team has worked on everything from 1950s ranch houses near the Crane County Courthouse to newer manufactured homes and oilfield housing. We know the local building department and what they look for, and we can help you choose a panel profile that fits the look of your property without overbuilding.

Our services in Crane

How a Job Works in Crane

Step 1: You call us at (432) 248-0371 or fill out the form. We schedule a free on-site assessment, usually within a day or two. We'll walk the roof, check the fasteners and flashing, and give you a written estimate before any work starts.

Step 2: Once you approve, we order materials and pull the permit if one is required. In Crane, most full replacements need a permit, and we handle that paperwork. Our crew arrives early, protects your landscaping, and works efficiently. If it's a repair, we often finish the same day.

Step 3: We clean up every nail and scrap, then walk the roof with you to make sure you're satisfied. We don't leave until you've signed off and your property is clean.

Metal roofing in Crane runs from about $5.50 per square foot for corrugated panels to $10 or more for standing seam. A typical 1,500 square foot roof might cost between $8,000 and $15,000 depending on material and complexity. Repairs start at $450 for leaks or flashing, and screw replacement starts at $750. We also offer free inspections and estimates, so call (432) 248-0371 to get a precise number for your property.

My house is near Crane High School and the roof is original to the 1960s. Can you match the low slope with a metal roof?
Yes. Low-slope roofs are common in that part of Crane. We often use a standing seam or a mechanically seamed panel that handles low pitches without exposed fasteners, so you get better leak protection than the old shingles.
A storm just blew through and lifted some panels on my barn. How fast can you get out to Crane?
We prioritize storm damage calls. Call (432) 248-0371 and we'll schedule an inspection, often same or next day. We'll tarp any active leaks and give you a repair estimate on the spot.
What's the typical cost to replace a metal roof on a 2,000 square foot home in Crane?
For a 2,000 square foot home, expect roughly $11,000 to $20,000 for corrugated or ribbed panels, and $16,000 to $25,000 for standing seam, depending on pitch, access, and whether we remove the old roof. We provide a free estimate so you know exactly.
Do I need a permit to replace my roof in Crane, and who handles it?
Yes, the City of Crane requires a permit for roof replacements. We pull the permit for you and coordinate the inspection. Requirements can change, so we always confirm with the local building department before starting.
My neighbor's tree branches hang over my roof. Can I trim them, and does the HOA need to approve my new metal roof?
You can trim branches that cross your property line, but it's best to talk to your neighbor first. If you're in an HOA, check the covenants for approved roofing materials and colors before you order. We can provide product samples and documentation to help with approval.
Are you insured for roofing work in Crane?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Crane's climate?
Check fasteners and flashing once a year, especially after hail or high winds. We offer inspections and can replace worn screws and seals to keep your roof watertight. It's also a good idea to clear debris from valleys and gutters before the rainy season.
Why choose us?

Trusted professionals in Odessa

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Odessa

All your work handled by qualified professionals in Odessa

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

243+ Verified Client Reviews in Odessa

⭐⭐⭐⭐⭐ 4.9/5 · 243 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Odessa · Response within 24h · No commitment · ☎ (432) 248-0371

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Odessa ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm